Purple and gold dress, part 2

This blog is about creating the gold belt and appliquées that spice up the purple velvet dress I made in the previous costuming post.  If you want to know more about the techniques that I used, check out this blog where I review the Swirly Belt Course from Sparkly Belly. All the information about how to make this type of belt is in the course.

This blog is mostly about the process of how I made my belt and appliquées. Let’s get started! For the record, I write this blog after I finished the costume and did the photoshoot. No worries, I got it done in time!

Making a plan

When I start on a costume I usually make a lot of sketches and research fabric options but this was a bit on the fly. Instead I bought the course including the pattern book from Sparkly Belly. Any time that I could save would be most welcome. After printing the pattern book , I adjusted the belt design to make it more unique and add a bit to the sides or center so it would fit around my hips.

The holographic gold print lycra was already in my stash. I used it three years ago to cut hipscarfs for my beginners recital. Quick tip if you want to dress up your troupe or your students (or yourself) on a budget: get metallic printed lycra and cut out triangles to use as hip scarves. Works great on stage!

Parnassos CP 2015.jpg

In addition to the fabric, I needed decoration. I found left over rhinestone chain in my stash from the Pink Turkish costume I made five years ago. Now seemed a good time to use it. I was a bit worried that I wouldn’t have enough but the project was done before I reached the end of the rhinestone chain.

I wanted an accent color to create a contrast against the gold blackground and sparkly AB rhinestones.  I bought glue-on rhinestones in Topaz, a bit of a brownish gold color. Having contrast is very important to create more depth and intricacy in the decoration. I bough 5 gross (5×144) of SS6 rhinestones and 1 gross of the bigger SS20 rhinestones. That wasn’t enough.  I like my costumes to be heavily beaded so I purchased an extra gross of each to finish the job.


Close-up off beading on the Pink Turkish costume


I had a couple of smaller teardrop shaped rhinestone sew on stones in my stash and ordered some more. The big teardrop stones were also in my stash. I wanted to use them for the pink Turkish costume but never did. My recurring themes are planning on doing things and then not doing them, and buying too many rhinestones for my own good. Things could be worse.

The E600 glue was still in my sewing stash. I bought the glue for other craft projects *cough* making a mirror costume *cough* that didn’t happen…yet. Despite my hesitation to use glue on a belly dance costume I decided to go for it and see how it works. After all, it seems to work great for several big name designers and all those Russian dancers who make and sell costumes. It’s worth giving a try.

Cutting out the design

Admittedly I was in a time crunch that was really, really tight. I only had a couple of nights to finish this! It took more time than I anticipated but I still got it finished in the end. The first step was attaching the gold lycra to the belt base. That part went smoothly. Cutting the design out of the base material was a bit more daunting. The most important lesson that I learned is that scalpel knives are really sharp. It took me four hours to get to the point in the picture below. I also cut myself twice and had to stop because the cuts needed to heal.


Adding the rhinestones

I was teaching a class the next night so I started with slightly healed fingers and the knowledge that I ddn’t have to cut out things with a scalpel knife for a while. Let the decorating begin! I started by sewing the rhinestone chain along the ouside of the curls. This would give the pattern some more definition.

Here’s a close up of the belt. You can see the stitches where I attached the rhinestones . The Topaz stones are glued on with E6000. As you can see, I did a botch job if you look close to the edges of the fabric. I cleaned it up a bit by cutting away excess fabric for a cleaner look. Suprisingly for the overall look of the costume this doesn’t matter. It looked stunning before I fixed the rough edges and stunning after.


I spent about five hours on adding the Topaz rhinestones to the belt by hand. It was a great time to ponder over some questions in my head. I also noticed that the fumes of the glue were unpleasant. Some googling revealed that E6000 fumes are highly  toxic and should not be messed with. Read about the effects on a Burlesque costume maker on this page.

I am glad that I was costuming at night when our daughter was asleep. It would have been way worse if she had been in the room while I was using the glue. A note of caution for all costumers out there: E6000 works great for glueing rhinestones, but please, please take care of your health first. Wear protective gear while working with it, or choose an alternative that doesn’t contain tetrachloroethylene.

This is my work station. The small cup is there to hold the rhinestons. I covered the table with news papers to protect the surface. I used a sharp wooden stick to get the glue from the tube onto the costume in small dots. The glue isn’t runny, it’s sticky and almost gum like while it dries. I used the cotton tip to pick up a single rhinestone and put it on top of the blob of glue. Rinse, repeat. You can see the sparkle of the AB stones very well in all images.


In the image below you can also see one of the smaller swirls that I made to decorate the bra. When I took this picture I was still adding rhinestones to the design, so the end result contains even more rhinestones.img_7662-1

And then I was done! It was a bit of an anit- climax as I didn’t have time to line so I considered it done when I glued the last stone on and sewed the hook and eyes in place so I could wear the belt. It turned out very pretty. I laid the loose swirls out on the bra and stitched them in place. For a sumptious Rococo look  I let a couple of curls go over the edge of the bra to create a playful design. Here’s a close up of the bra with the swirls sewn on. As you can see, I ran out of rhinestones so the swirls on the bra are slightly less decorated. I’ll fix it once the next shipment of rhinestones comes in.


And this is what the costume looks like on the day of the photoshoot. This is a behind the scenes image taken with my cell phone. Excuse the poor quality, better images will follow once the photographer has time to process all the images from the shoot. I made matching opera gloves as accesoires to go with the dress. The tutorial for the gloves are on this page. The purple rhinestone necklace and clip on earrings were a souvenir from my visit to Miami in 2009.


It is comfortable, pretty and suits our theme of wearing purple and gold. Yay! I still have to work on this some more. I want to add extra rhinestones to the top and I have to line the belt and some of the appliquées. Maybe adding some ruffles to the lower part of the dress, as it could use a bit of drama on the bottom. Or maybe some sequins for extra sparkle. I am not sure yet. I happen to have a roll of holographic gold sequins in my stash that could work though.

What do you think?  More ruffles? Leave it as it is? or do you have other ideas to make the dress even prettier? Let me know!

I am a professional bellydancer, costume-a-holic and dance studio owner living in the Netherlands. My biggest passion is teaching and performing bellydance and I intent to continue doing so for quite some time! I am a teacher at the online Belly Dance Business Academy, where you can find courses and workshops to help you grow your belly dance business. If you like to be kept in the loop, please like Kyria Bellydance on Facebook or follow me on Twitter. Leave your questions or comments in the box below, or let me know through Facebook.

Purple and gold dress – Part 1

Adding gussets to create a wider skirt

My last official photoshoot is over three years ago. It’s about time to get some new promo pictures! Our Sense of Bellydance group booked a shoot next Saturday and we decided to go with individual costumes, all of us in purple with gold accents.

Of the many costumes I own, I am lacking a purple costume! With only a couple of weeks to go, I headed out to the Utrecht fabric market and bought a lovely midnight purple stretch velvet. As I have enough stuff lying around in my stash, this project would be a great opportunity to do some stash busting.

In February this year I purchased the Sparkly Belly Swirly Belt tutorial. This would be perfect for trying out some new techniques! With the swirly belt tutorial I would make gold appliqués and a belt to add some bling. Today I’m writing about creating the dress and I’ll write another blog post about making the belt and swirls.

How to make a belly dance dress: start with a bra base

I got a couple of questions when I posted pictures on Facebook about how I made a belly dance dress with integrated bra. I took a commercial pattern for a dress (I prefer a princess seam dress, like this). Add some extra fabric to the top of the front pattern pieces so there’s enough fabric to work with. I drafted a similar pattern a couple of years ago so I took it out of my pattern storage. I had a Dina bra base in my stash as well. The Dina bra base is made of compressed foam. They are light weight, sturdy and are available in cup sizes B-C-D. As the cups are connected in the middle, the bra band size is a bit limited. They are easy to sew through by hand or machine and you can find them on eBay for about 13 USD.

Dina belllydance bra base
Dina bra base

How did I do it?

I’m a trial and error kind of person and the process went a bit like this:

  1. Put on dina bra base
  2. Put on dress, hike it up untill the desired height, covering the bra. Pin fabric of dress to bra base
  3. Take dress and bra off, use pins to get the fabric evenly over the bra base. Pin with again, then hand baste into place. I decided to baste the top and sides of the bra but I could have just basted the upper edge of the bra and leave it at that.


The dress with the bra base pinned to it


I got a zipper for the middle back of the bra, but I didn’t like how it was visible in the back so I am taking it out. In order to get the fabric over the bra base I took of the flimsy straps that came with the bra. I made new straps by covering waistband elastic in the same fabric as the dress. By adding new straps covered in fabric, I tried the dress on and tweaked a bit with the princess seams to adjust the fit. The bra was hand stichted to the dress.

Picture of bra pinned to dress


Adding gussets to create a wider skirt
Adding gussets to create a wider skirt

The pattern of the dress promised a flared, mermaid like skirt. My idea of a flared skirt was a little bit more dramatic compared to the ‘everyday wear’ pattern. I kept the bottom part of the seams open and added gussets, triangular shaped pieces of fabric. In the center back I added a quarter circle to get a bit of a draped effect.

Time management

As I was a bit short on time, I had to sew during the day as well. Our daughter found the whole process quite fasinating and wanted to help, so I let her ‘pin’ the fabric.img_7644

This was a family effort. My mum helped me with pinning the hem for me. I got up on the dining table and she pinned along the edge.


Thanks mom!

I cut off excess fabric and added a seam. After a week of late night sewing, the dress was done! For reference, It took me about 10 hours to make this dress. I saved time because I didn’t need to draft a pattern. I used a Dina bra base so no time spent on converting a regular bra to a belly dance bra, and there is no decoration on the dress. I didn’t take a picture of the dress while wearing it, so you’ll have to wait for the next blog post for a full body shot.

Next week I’ll write about the swirly belt tutorial and creating appliqués. See you there!

I am a professional bellydancer, costume-a-holic and dance studio owner living in the Netherlands. My biggest passion is teaching and performing bellydance and I intent to continue doing so for quite some time! I am a teacher at the online Belly Dance Business Academy, where you can find courses and workshops to help you grow your belly dance business. If you like to be kept in the loop, please like Kyria Bellydance on Facebook or follow me on Twitter. Leave your questions or comments in the box below, or let me know through Facebook.



White and red cherry dress

This post is not about belly dance costumes. It is about other nice stuff I made and that I want to show you. This white and red cherry dress is the perfect example of how a nice basic pattern paired with a cute cotton print fabric can create stunning results. It also gave me an excuse to wear these gorgeous red heels that have been sitting on the shelf for a while. In my daily life I mostly wear comfortable sneakers and flats.

I made this dress in 2008, from a McCalls pattern. Whenever I buy fabric, I usually take a picture of the fabric plus the pattern. If I don’t have time I can always find what I was planning in my photostream. In this case I was so excited that I didn’t wait and started working on it right away.

DSC_0087I love this McCalls pattern as it is fairly easy and has a fantastic shape to it. The dress can be worn with a petticoat but it looks very nice without petticoat as well. The skirt is not a complete circle: I had some trouble in the past with full circle skirts that kept being blown upward by the wind. Marylin Monroe made it look cute but on me, I look more like a crazy lady trying to keep her skirt down. The length of the skirt is also perfect for me. I am tall and the skirt hits slightly over the knee. That’s a perfect length for me as it flatters me and it stays decent when I sit down. Most dress and skirt patterns that hit mid thigh don’t work for me because the skirt shortens another four inches when I sit down, making it rather uncomfortable for daily wear.


Once I finished the dress in 2008, I wore it on several occasions but I never got pictures of it. Last year I couldn’t wear it because I was pregnant, so this year I had my heart set on wearing some cute summer dresses. It was a bit tight but it still fits.

I went to a local playground and took some pictures with a tripod and remote control. In case you’re wondering, the black square thing in my right hand is the remote. I put my hair up for the occasion and added a couple of hair flowers. It made me feel all princess like:

cherry 2

And to give you a good view of the back:

cherry 01

As it was a playground, I also tried a couple of pictures on the swing. This is the one that came out best:

cherry 3

I am a professional bellydancer and costume-a-holic living in the Netherlands. My biggest passion is teaching and performing bellydance and I intent to continue for quite some time! If you enjoyed this post and like to be kept in the loop, please like Kyria Bellydance on Facebook or follow me on Twitter. Leave your questions or comments in the box below, or let me know through Facebook.

Fantasy/historic costume: the black and gold jacquard dress

In a previous post I mentioned how unforgiving synthetic fabric is during the summer, when a pretty dress turns into a torture device within a couple of hours in the sun. This didn’t stop me from making more dresses from synthetic fabrics. The historic costumes might want to look away at this point, as this dress is made with a commercial pattern and is in no way historical accurate. I didn’t know what to do with my hair, the hair and make-up are also not historical accurate, landing this dress squarely in the ‘pretty fantasy dress’ category. But hey, it worked! I made this dress around 2004 if I recall correctly, so it’s been a while.

I found this fabric at a one euro per meter sale at the local fabric market in Utrecht. The gold satin was a perfect match and I had been eying this pattern for a while. It was my first try at this type of costume and some things didn’t quite work out. The bodice is fully lined and contains bones to keep it’s shape. The front panel of the bodice came out a bit frumpy and I always thought I might add some beading to the front to cover it up. As I doubt that I will fit into this dress, I’ll probably sell it as is.

The poufy shoulders are a bit heavy with filling so they tend to droop to the side. Not helped by the part on top of the shoulder that is supposed to keep the sleeve up, but stands away from my shoulders despite several attempts to adjust this.

Image 056


The back of the dress has visible lace up closure in the  back with a modesty panel behind the eyelets, so it would go up a couple of centimeters. I don’t dare to try it on though, as my size has changed so much through the years. The gold underskirt was pretty easy to add and this costume has a bum roll to create the correct silhouette. Or wear a fanny pack underneath to keep your keys and wallet safe!

As you can see I did pattern matching in the back, something I was rather proud of. These pictures were taking at the boulevard/water in the center of Utrecht.

Image 063

I am a professional bellydancer and costume-a-holic living in the Netherlands. If you enjoyed this post and like to be kept in the loop, please like Kyria Bellydance on Facebook or follow me on Twitter. Leave your questions or comments in the box below, or let me know through Facebook.

Historic/fantasy costuming: the purple dress


Besides belly dance costumes I made my fair share of every day clothes, gothic clothes, historic and fantasy costumes. As I am not off on a holiday this summer I decided to rummage through my old pictures and relive the glory days. This is not a belly dance costume but I figured anything costume related might pique your interest.

This purple taffeta dress was made with McCalls 4144. It’s now out of print. The white eyelet lace fabric has lilac and gold thread in it and looks really pretty and delicate up close. The bodice closes with lacing in the back and is fully lined with white cotton. One of the lessons I learned is that synthetic fabric looks pretty but is very sweaty when worn. It didn’t stop me from making more costumes in synthetic fabric, but I always packed a hand fan and water when I was wearing a dress shaped personal sauna.

Image 010

The bodice has plastic boning in the lining and this is the rare dress where the off the shoulder style stays in place and looks nice all the time. The downside was that raising my arms was nearly impossible! I made this costume somewhere around 2002 and I wore it at the Wave Gothic Treffen Festival in Leipzig, plus during some Dutch events around the same time. The costume jewelry round brooch in the center of the neckline was purchased at a flea market in Leipzig and is set with AB rhinestones that reflect purples and whites. The last lesson I learned was that a velcro closure on a shoulder bag paired with delicate fabric didn’t work: the underskirt ended up with some nasty pulls from the Velcro.

I ended up selling this dress around 2008 to make room for new costumes. The picture below was taken at the Catherijne Convent in Utrecht, a medieval almshouse that is available to the public. Image 002

I am a professional bellydancer and costume-a-holic living in the Netherlands. If you enjoyed this post and like to be kept in the loop, please like Kyria Bellydance on Facebook or follow me on Twitter. Leave your questions or comments in the box below, or let me know through Facebook.

Peacock jersey maternity dress

Peacock maternity dress

So many things to do, so little time! In the past months I’ve searched for (and found) maternity clothes that are comfortable and pretty. To my disappointment, most of the maternity dresses are rather flimsy and have little to no wshape. My waistline has moved up 10 cm/4″ and is a lot less pronounced, but that doesn’t mean I want to look like I’m wearing a tent!

I’ve been playing around with regular sewing patterns so I could make some maternity wear myself. I am now in my eigth month and the importance of having maternity wear that is also suitable for nursing is hitting me. That’s why I made a wrap dress from a pretty jersey print (it’s a fake wrap: the front panels are sewn instead of tied) with a V-neck. It can easily be used for nursing, if needed.

I used a pattern from Knip, february 2015. To be more precise, it’s this pattern and it can be ordered as a pdf pattern. It has attached sleeves, a v-neck, fake wrap front panels and an A-line skirt. Best of all, as it only has four patttern pieces, this was going to be a piece of cake! I’ve had this amazing printed jersey in my stash for over a year now, thinking about making a dress but not actually getting to the point of making it. I decided to go for it. When making maternity wear,I recommend using jersey with 5% lycra as hit will hold it’s shape and allows for extra growth. I made this pattern in EU size 38, which is my not-pregnant hip size.

Peacock dresss pattern

Adjustments to the pattern

I made a couple of small adjustments. I decided to not raise the waistline, in order to make it more wearable for after the baby is born. Besides, the tie can be used to pull the waistline in where it currently is. I added a bit of length to the sleeves because I have long arms, and I added roughly 10 cm/4″to the middle front panel of the skirt to create a bit more room for my belly. The sleeves are meant to be 3/4 and will remain that way, because the pattern piece fits nicely on 1.50 m wide fabric fold along the grain. If the sleeves were a seperate pattern piece, I could have have gone for full length sleeves.

peacock dress adjustments

Sewing the dress

Lucky for me, putting the dress together was fairly easy. I used a stretch stitch on my sewing machine for the seams and put it all together in roughly two hours. That’s what I call a nice result for an afternoon of sewing! I reinforced the neckline with seam tape, folded the seam inwards and stitched right through the tape so the neckline would not stretch out of shape. If you haven’t used seam tape yet because you’re intimidated, don’t be afraid and give it a go. It took me a minute or so to apply (like vlieseline, it bonds with heat) and it made a lot of difference in the shape and stability of the neckline. I didn’t get my twin needle out but sewed the bottom hem and sleeve hem with parallel straight stitches with a slight stretch to it.

Seam tape


For daily wear I’ve made a matching tie, but I was planning on going to a hafla (bellydance party) and more bling is always a good thing for such an occassion. I made a gold tie out of a scrap of gold printed lycra and topped it off with a gold flower. Instant party dress!

Wear and fit

It has quite a good fit for such a basic pattern: the neckline is not too revealing but still wide enough to use for nursing thanks to the pleats in the front panels. The waist comes down a bit too low for my current shape: if I had made this pattern when I was six months along and/or I didn’t want to nurse, I’d probably made the waist higher. The length of the sleeves worked out for me, and the skirt hits knee length. I gathered the extra fabric of the front skirt panel in the middle and sewed it to the top. A very basic adjustment with the desired effect. If I wanted to go for a sleeker silhouette, I could have used the same A-line skirt as it was. The jersey is stretchy enough to allow for the baby bump.

 peacock dress at hafla

If you are looking for maternity patterns, I recommend checking out similar patterns for jersey dresses and adding a smidge of extra fabric to the skirt part. After delivery I can always remove the extra fabric and create  a sleeker silhouette. Here’s an outdoor shot with the matching tie and the rare occassion of me wearing heels. I am 36 weeks pregnant and just got back from the hairsalon, which is always a good moment to take a picture

Peacock maternity dress

I am  a professional bellydancer and costume-a-holic living in the Netherlands. I’ve been sewing and crafting stuff for over twenty years, for theaters, dance costumes, historic costumes and regular clothes.. If you enjoyed this post and like to kept in the loop, please like Kyria Bellydanceon Facebook or follow me on Twitter. Leave your questions or comments in the box below, or let me know through Facebook and I might write a blog post to answer your costuming question.

Thanks for reading and see you soon!

Red satin dresss

My dance friend is turning 55 on December 11th and we are doing a bellydance with boa dance. It has all been great fun as it is a choreography on an Egyptian popsong, thus giving it a distinctive bellydance flavor. The costume choice is a long red satin dress with half circle skirt. The upper edge could have red feathers along the edge and there will be a black insert in the slit. The hip area will get a ruched red satin part for a small hip accent.

I got the main outline for the dress from Marjan and yesterday I made the bodice (Halterstraps are my addition) and put it on my mannequin so the fabric can hang and I can hem the skirt in a week or so.

It looks rather long in the torso but that is because the weight of the skirt is dragging the bodice down, I have more boobs then my mannequin and also more neck. First time for cutting satin on the bias, and I tell you it is hell. It drapes very nicely though, bodice has no zipper or buttons but can be pulled on over the head. It has a slinky effect that makes it sort of cling to the body without being tight fitting and it is very unflattering due to being all red and shiny and not form fitting but we will look great together on stage.

sewing project – purple melaya dress

We bought the fabric on the market last weekend and found an amazing glitterdot fabric with holographic sequins. I really detest the stuff, but it looks amazing on stage so we went with it anyway. At 2 euro’s a meter mistakes are affordable.

We went with burgundy red and purple velours as base colors, with gold sequins as accents. The fabrics:
I took a basic dress pattern, readjusted to kneelength and made a basic dres out . Despite stretchy fabric I added a zipper so we could easily change between performances. I like the shape of the dress, but the sequin fabric doesn’t drape well for volants. It’s a killer on stage and when moving though, so that’s good. I tried adding a ruffle along the neckline but ended up with the farao-collar look and removed it again. I’m taking it with me to practice tomorrow to show the others and let my partner try it for size. How about adding a pattern by glueing sequins on the dress to brighten up the purple?

Red beledi dress

Just finished the red beledi dress I was working on. Very fast project, you might recognize the belt and bra set as the cheap egyptian costume that I got from ebay.de

Jeoffrey took the pictures and he really thinks that cane dancing looks silly. So he only took three pictures while giggling about me dancing with a cane.

The dress is made of red velours de panne with sparkles printed/glued on them. I believe L.Rose carries the same fabric as ‘sparkle velvet’ or something like that. Dress is bases on a basic princess seam pattern (Burda) adjusted with keyhole neckline and halfcircle sleeves falling open from the elbow.

One down, some more to go. I’m getting on the ghawazee coat project now, hope that it’s finished by tomorrow afternoon. After that, all I need to do is jazz-up the black velvet pants/strapless bra construction that I made, and I’m done. Yay!